How To Clean Rollers Hp Officejet Pro 8600 Plus

Z7_3054ICK0KGTE30AQO5O3KA30N0

HP Officejet Pro 8600 Printers - The Automatic Document Feeder (ADF) Does Not Pick Paper

This certificate is for the Officejet Pro 8600 e-All-in-Ane printers.

The Automated Document Feeder (ADF) on the printer does not pick upwardly paper. The procedures in this certificate can help by showing you how to check the paper and clean the ADF mechanism.

Try the following solutions in the guild presented to resolve the issue. When one of the solutions resolves the issue, there is no need to keep troubleshooting.

note:
Brand certain that no more than l sheets of paper are loaded in the ADF input tray at one time. If the ADF picks single sheets just does not pick from stacks of paper, make sure you are inserting the proper corporeality of newspaper.

Step 1: Check the condition of the newspaper and reload it

The quality and type of paper can touch the print job. Follow these guidelines to make certain that the newspaper is appropriate. If it is non, load an advisable newspaper blazon for the printer.

note:
The edges of depression-quality paper that has absorbed moisture might roll or lift the sheet so the paper does not feed into the ADF. As well, Photo paper or other newspaper types with glossy surfaces might not pick well and should be avoided. If y'all are unsure if you should ship paper through the ADF, use the flatbed scanner.

Remove the paper from the ADF.
Equally a test, obtain x sheets of new obviously white newspaper to class a stack of paper.
Tap the stack of newspaper on a flat surface to align the edges.

notation:
Do non fan the paper past running your fingers through the paper stack.
Insert the stack of newspaper into the ADF input tray. Make sure the stack is inserted fully into the input tray and that the printer recognizes that paper has been loaded. When newspaper is properly loaded into the ADF, the printer should make a sound, emit a light from an LED, or brandish a message on the command panel.
Slide in the newspaper width guide to the border of the paper stack. Make sure that the guide rests gently against the paper stack and does not demark it.
Try using the ADF over again.
- If the ADF picked all the sheets in the stack of paper, and so reinsert your original(southward) and try copying or scanning again.
- If the ADF did not choice all sheets in the stack of paper, so continue to the next step.
If your original fails to pick, just all sheets in the test stack of paper picked, then utilize the flatbed scanner to scan your original.

Step 2: Clean the ADF pick rollers

Dust, newspaper fiber, and other debris might accumulate on the pick rollers and crusade newspaper feed issues. To assistance prevent paper feed bug, make clean the rollers inside the ADF.

Open the ADF cover.

HP Officejet Pro 8600 Printer	HP Officejet Pro 8600 Plus and Premium printers

Lightly dampen a clean, lint-free cloth with distilled water, and then squeeze any excess liquid from the cloth.

caution:
Do not use tap water or alcohol. Booze can dry rollers. Tap h2o contains impurities that can harm rollers.

Press the cloth against the roller while rotating it with your fingers. Apply a moderate corporeality of pressure to remove grit or clay buildup.

HP Officejet Pro 8600 Printer

HP Officejet Pro 8600 Plus and Premium printers

ADF cover

Rollers

Separator pad

Clean the separator pad using the same cloth.
Firmly shut the ADF cover.
Try using the ADF over again.
- If the ADF picked the paper, you do not need to continue troubleshooting.
- If the ADF did not pick the paper, continue to the next step.

Step 3: Reset the printer

In many cases, performing a "hard reset" of the printer can solve a trouble.

Printing the Power push button to turn off the printer.
Disconnect the power string from the rear of the printer.
Unplug the power string from the electrical outlet.
Expect threescore seconds.
Plug the power string back into the electrical outlet.
Reconnect the power string to the rear of the printer.
Press the Power button to turn on the printer.
Try using the ADF again.

If the ADF picked the newspaper, you do not demand to continue troubleshooting.
If the ADF did not choice the paper, continue to the next solution step

Footstep 4: Service the printer

If the other steps in this document fail to resolve the error, then service or supercede the printer.

Service or supersede your HP product if the issue persists after completing all the preceding steps.

Get to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will exist directed to a local service center in your area.

To confirm your warranty status, go to HP Production Warranty Check. Repair fees might use for out-of-warranty products.